What Happens if the Feed Roller Tension Is to Tight, Loose, or the Wrong Size – Complete Guide

What Happens if the Feed Roller Tension Is to Tight, Loose, or the Wrong Size – Complete Guide

If you have a MIG welder you know that it has a set of feed rollers on it the pull the wire from the wheel to the lead, to the weld gun where it ultimately welds a bead. However, what you may not know is how important these feed rollers are. I learned this the…

What is the Cheapest Metal for Welding Projects – 7 Places to Start Looking

What is the Cheapest Metal for Welding Projects – 7 Places to Start Looking

Whether your just tinkering around on the side or doing a welding project for high school then you’re going to need metal for your welding project. I’ve done a lot of these over the years a to be a truthful metal can cost a lot of money especially in today’s economic state. So what is…

What is the Best Way to Weld Galvanized Metal – Tips, Techniques, and Concerns

What is the Best Way to Weld Galvanized Metal – Tips, Techniques, and Concerns

One of the worst things I’ve found to weld over the years is galvanized metal. While welding does create fumes if you’re welding galvanized metal the fumes can be extremely unsafe. So this begs the question, what is the best way to weld galvanized steel and do it safely. The best way to weld galvanized…